Aluminum alloy climbing frame
Classification:
Scaffolding
Description
(1) Product Description
Aluminum climbing frames are mainly used in high-rise shear wall structures. It can climb or descend along buildings. It has great development advantages in high-rise buildings. When the aluminum climbing frame is in an upward state, it can meet the needs of top steel reinforcement binding, formwork support, concrete pouring, and lower formwork dismantling and turnover during structural construction; When landing, it can meet the requirements of primer, plastering, paint spraying, veneer, and glass curtain wall installation during decoration construction.
(2) Product parameters
Product name: Aluminum alloy climbing frame
Material: Aluminum alloy
Dimensions: Provide various sizes based on the engineering drawing
(3) Product Details
(4) Advantages
Convenient: Easy to install, saves 30% of working hours, and can shorten the overall construction period by 20%;
Material: Aluminum alloy material is lightweight and has a higher yield than steel;
Weight reduction: Reduce the load-bearing requirements of the building under construction by 50%;
Aesthetic: Frameless corrugated mesh, with higher strength and easier disassembly and assembly;
Safety: Strong sealing, avoiding falling objects from high altitude, effectively enhancing safety factor;
Transportation: Same volume, light weight, transportation cost reduced by over 60%;
Durable: Non rusting, strong acid and alkali resistance, with a service life of up to 20 years;
Maintenance: No spraying, fast and efficient, with maintenance costs reduced by more than 50% compared to steel climbing frames;
Residual value: The scrap aluminum recycling has a high residual value.
(5) Instructions on product assembly
Check if all components are complete and undamaged. Do not use damaged or mismatched components;
Be careful to avoid collision with the mold frame during transportation.
Keywords:
Aluminum alloy climbing frame
Product Consulting
Related Products
The building aluminum alloy formwork system consists of the wall and column formwork system, the beam formwork system, the floor slab formwork system, the external wall joint formwork system, the suspended formwork system, and the accessory system. Formworks are connected by such accessories as pins, pin pieces, and bolts; fastened by back ridges, tie screws, drawing pieces, angle iron, etc.; supported by single top bracing, diagonal bracing, concrete pads, and other bracing pieces; thus composing an organic whole with reliable bearing capacity, stiffness, and stability.
Simple Assembly Deck Formwork - Deckform
Payment: T/T 30% deposit payment before manufacture, and 70% balanced payment against B/L Copy Original Region: China Port Of Dispatch: Shenzhen, China Min Order: Containers Deckform is an advanced aluminum panel prop work system that easily comes to assembly and disassembly
Efficient Wall And Column Formwork
The wall column formwork consists of at least two disposable formwork walls placed opposite each other. The formwork walls are made of pressed metal plates, and the rest are the final poured concrete.
Quick Early-Stripping Slab Formwork - Fastform
Payment method: 30% deposit by wire transfer before manufacturing, and 70% balance to be paid against a copy of the bill of lading. Origin: China Sending Port: Shenzhen, China Minimum order: Container
Payment method: 30% deposit by wire transfer before manufacturing, and 70% balance to be paid against a copy of the bill of lading. Origin: China Sending Port: Shenzhen, China Minimum order: Container Aluminum alloy climbing frames are mainly used in high-rise shear wall structures. It can climb or descend along buildings. It has great development advantages in high-rise buildings.
Related Products
The building aluminum alloy formwork system consists of the wall and column formwork system, the beam formwork system, the floor slab formwork system, the external wall joint formwork system, the suspended formwork system, and the accessory system. Formworks are connected by such accessories as pins, pin pieces, and bolts; fastened by back ridges, tie screws, drawing pieces, angle iron, etc.; supported by single top bracing, diagonal bracing, concrete pads, and other bracing pieces; thus composing an organic whole with reliable bearing capacity, stiffness, and stability.
SERVICE HOTLINE: 86-0757-86266590
Fax: +86 0757-86325196
Zip code: 528000
E-mail: zhyformmarket@zhyform.com
Address : Room 2503, Block E, Wanda Plaza, No. 28 Guilan North Road, Guicheng Subdistrict, Nanhai District, Foshan City, Guangdong Province
Production Base: Yinzhan Management Area, Longtang Town, Qingcheng District, Qingyuan City, Guangdong Province
© 2024 Guangdong Zhonghongyang Construction Technology Co. All Rights Reserved | SEO | www.300.cn