Simple Assembly Deck Formwork - Deckform
Classification:
Formwork
Description
1. Product Description:
It is an advanced aluminum alloy plate column template system that is easy to install and disassemble.
2. Product parameters:
1) Product Name: Simple Assembly Deck Template
2) Material: Aluminum alloy, plywood
3) Panel specifications (mm): 900x900mm/900x1800mm/1800x1800mm (size available for selection)
4) Basic components: panel, support head, pillar, tripod, truss
5) Platform template height: unlimited, adjustable by replacing pillars
3. Product details:
4. Advantages:
1) Fast and efficient:
-By using a 1.8x1.8m large panel and a 3.24m forming area, the sheet metal can be formed more quickly.
Aluminum profiles make them lightweight. The largest panel is 1.8x1.8m and weighs 48.3kg
2) Low usage of cranes
-The thickness can reach 300 millimeters.
-Easy to install, with few system components (pillars+panels), only 3 steps required, and the hook is pushed up to support.
5. Instructions on product assembly
1) Check if all components are on site, undamaged, and functioning properly - (refer to inspection checklist and quantity table). Damaged or incorrect components must not be used.
2) Before assembly, ensure that the panel is clean.
Handle the panels carefully during transportation. Avoid collisions and collisions. Do not climb the panel. When peeling, do not roughly hit, pry, or drop the panel. Arrange and stack panels correctly. Be careful when operating the panel.
3) The maximum safe load capacity is 13.75kN/m2 per square meter.、
Keywords:
Simple Assembly Deck Formwork - Deckform
Product Consulting
Related Products
The building aluminum alloy formwork system consists of the wall and column formwork system, the beam formwork system, the floor slab formwork system, the external wall joint formwork system, the suspended formwork system, and the accessory system. Formworks are connected by such accessories as pins, pin pieces, and bolts; fastened by back ridges, tie screws, drawing pieces, angle iron, etc.; supported by single top bracing, diagonal bracing, concrete pads, and other bracing pieces; thus composing an organic whole with reliable bearing capacity, stiffness, and stability.
Simple Assembly Deck Formwork - Deckform
Payment: T/T 30% deposit payment before manufacture, and 70% balanced payment against B/L Copy Original Region: China Port Of Dispatch: Shenzhen, China Min Order: Containers Deckform is an advanced aluminum panel prop work system that easily comes to assembly and disassembly
Efficient Wall And Column Formwork
The wall column formwork consists of at least two disposable formwork walls placed opposite each other. The formwork walls are made of pressed metal plates, and the rest are the final poured concrete.
Quick Early-Stripping Slab Formwork - Fastform
Payment method: 30% deposit by wire transfer before manufacturing, and 70% balance to be paid against a copy of the bill of lading. Origin: China Sending Port: Shenzhen, China Minimum order: Container
Payment method: 30% deposit by wire transfer before manufacturing, and 70% balance to be paid against a copy of the bill of lading. Origin: China Sending Port: Shenzhen, China Minimum order: Container Aluminum alloy climbing frames are mainly used in high-rise shear wall structures. It can climb or descend along buildings. It has great development advantages in high-rise buildings.
Related Products
The building aluminum alloy formwork system consists of the wall and column formwork system, the beam formwork system, the floor slab formwork system, the external wall joint formwork system, the suspended formwork system, and the accessory system. Formworks are connected by such accessories as pins, pin pieces, and bolts; fastened by back ridges, tie screws, drawing pieces, angle iron, etc.; supported by single top bracing, diagonal bracing, concrete pads, and other bracing pieces; thus composing an organic whole with reliable bearing capacity, stiffness, and stability.
SERVICE HOTLINE: 86-0757-86266590
Fax: +86 0757-86325196
Zip code: 528000
E-mail: zhyformmarket@zhyform.com
Address : Room 2503, Block E, Wanda Plaza, No. 28 Guilan North Road, Guicheng Subdistrict, Nanhai District, Foshan City, Guangdong Province
Production Base: Yinzhan Management Area, Longtang Town, Qingcheng District, Qingyuan City, Guangdong Province
© 2024 Guangdong Zhonghongyang Construction Technology Co. All Rights Reserved | SEO | www.300.cn