In order to improve the standardization level of leasing and contracting services for building aluminum alloy templates in China, establish a unified operating standard for industry leasing and contracting services, and further promote the preparation of the "Building Aluminum Alloy Template Leasing and Contracting Service Standard", the China Infrastructure Material Leasing and Contracting Association (hereinafter referred to as the "China Construction Leasing Association") held the third working group meeting on July 28 to discuss the specific content of the standard working group draft.

△ Meeting venue

As one of the participating units, Zhonghongyang Aluminum Mold has always attached great importance to national and industry standardization construction and actively participated in various standard preparation activities. In 2022, we actively responded to the industry service standard preparation activity organized by the China Construction Leasing Association, and together with experts, scholars, and industry elites from across the country, we provided suggestions and contributed to the formulation of the "Construction Aluminum Alloy Template Rental Contract Service Standard".

Representative of Zhonghongyang Aluminum Mold: General Manager Assistant - Zhou Peng

At this working meeting, the standard working group discussion draft was reviewed chapter by chapter and specific items were discussed. Clarified the specific values of depreciation, amortization, and residual value ratio; Methods and formulas for settlement of lease fees, calculation of overdue rent, calculation of engineering quantity after changes, and confirmation of returned materials; Added tables such as "Material Entry List", "First Floor Construction Quality Acceptance Form", "Aluminum Alloy Template Acceptance Form", "Material Return List", and "Material Return Comparison Table" to further clarify the specific items and indicator requirements for verification; Regarding the aluminum alloy template leasing and contracting service contract template, which mentions further refinement of the rights and responsibilities of the lessor and lessee, the clause "the lessee requires the actual quality standards of this project" has been redefined.

List of participating units in this standard compilation

Editor in Chief of this standard:
Guangdong Zhite New Materials Group Co., Ltd
China Railway 12th Bureau Group Construction and Installation Engineering Co., Ltd. Steel Structure Branch

Participating units:
Beijing China Railway Construction Technology Co., Ltd
Zhejiang Yike Construction Technology Development Co., Ltd
Jiangsu Tianlicheng Construction Technology Co., Ltd
Guangzhou Jingxing Construction Technology Co., Ltd
Zhaoqing Chuangfu New Materials Technology Co., Ltd
Guangdong Qizheng Technology Co., Ltd
Shanghai Baoye Group Co., Ltd
Tianjin Jiuwei Holding Group Co., Ltd
Shandong Guangtai Engineering Technology Co., Ltd
Handan Ruizhi Construction Engineering Co., Ltd
Guangdong Zhonghongyang Construction Technology Co., Ltd
Jiashengtu Hebei Building Materials Development Co., Ltd
Hebei Jingchen Engineering Technology Co., Ltd
China Construction Aluminum New Materials Co., Ltd
Guangdong Nanaluminum Building Formwork Technology Co., Ltd
Tianjin Changyi Construction Technology Co., Ltd
Shenzhen Chengjie Mold Frame Technology Co., Ltd
Shenzhen Huizhi Pinshang Technology Co., Ltd

List of Experts and Representatives Attending the Compilation of this Standard

The conference invited Lei Liying, former director of the Standard Quota Research Institute of the Ministry of Housing and Urban Rural Development, as an expert to oversee and guide the standards. Yu Naiqiu, President of China Construction Leasing Association; Shen Changsheng, Executive Deputy Secretary General of China Construction Leasing Association; Deputy Secretary General Zhang Shaofang and Secretariat members Ma Xiaoxi, Li Liang, Wang Jie, Bai Yihan, and Zhang Mingjie; Zhang Peng, Director of the Aluminum Mold Division of the Steel Structure Branch of China Railway 12th Bureau Group Construction and Installation Engineering Co., Ltd; Han Aiyi, Deputy General Manager of Beijing China Railway Construction Technology Co., Ltd., and Guo Weifeng, Manager of Mold Industry Center; Zhou Hongguang, General Manager of Zhejiang Yike Construction Technology Development Co., Ltd., and Lu Xin, Chief Engineer; Zhang Huai'an, Chairman of Shaanxi Tianlicheng Construction Technology Co., Ltd; Ma Guang, Deputy General Manager of Marketing and Wang Qiang, Deputy General Manager of Technology of Jiangsu Tianlicheng Construction Technology Co., Ltd; Jiang Ganqing, Deputy General Manager and Chen Hui, Marketing and Business Director of Zhaoqing Chuangfu New Materials Technology Co., Ltd; Wei Ming, General Manager of Guangdong Qizheng Technology Co., Ltd. and Niu Chao, Chief Engineer; Cai Hongbiao, Manager of Design and Research Department of Guangzhou Jingxing Building Technology Co., Ltd; Yang Zongliang, Vice Minister of Quality and Technology Department of Shanghai Baoye Group Engineering Materials and Equipment Company, Xu Minggang, Technical Manager of Leasing Engineering Department, and Wang Tianqi, Technical Director of Leasing Engineering Department; Yun Mingbo, Executive President of Tianjin Jiuwei Holding Group Co., Ltd., and Liu Shujian, Director of Technology Center; Gao Xiucai, Deputy General Manager of Shandong Guangtai Engineering Technology Co., Ltd; Wang Yadong, Manager of Business Department, and Xu Dingjie, Manager of Engineering Technology Department of Handan Ruizhi Construction Engineering Co., Ltd; Zhou Peng, Assistant General Manager of Guangdong Zhonghongyang Construction Technology Co., Ltd; Liu Jing, Deputy General Manager of Hebei Jingchen Engineering Technology Co., Ltd; Zhang Lei, Technical Director and Li Honglei, Business Manager of Jiashengtu Hebei Building Materials Development Co., Ltd; Mao Hong, Chief Engineer and Deputy General Manager of China Construction Aluminum New Materials Co., Ltd., and Su Pixing, Design Director; Wu Tieli, Deputy General Manager of Guangdong Nanaluminum Building Formwork Technology Co., Ltd., Zuo Yaojun, Deputy Director of Design Department, and Deng Kuan, Director of Engineering Department; Hu Yunfang, General Manager of Shenzhen Huizhi Pinshang Technology Co., Ltd., attended the meeting. The meeting was chaired by Zhang Shaofang, Deputy Secretary General of China Construction Leasing Association.

Guangdong Zhonghongyang Construction Technology Co., Ltd., as a standard participating unit and production leasing enterprise in the construction formwork industry, has successively participated in the compilation of the National Standard of the People's Republic of China - Wood-plastic Composite Board for Building Formwork and the Guangdong Provincial Standard - Technical Specification for Aluminum Plastic Formwork. As a participating unit of the standard, Zhonghongyang will fully leverage its service advantages, work together with industry experts, and complete the standard preparation work with high quality and quantity. As a professional service provider of building aluminum alloy formwork, Zhonghongyang has been deeply involved in the construction formwork industry for many years, continuously focusing on the field of construction formwork, and comprehensively utilizing information technology to provide customers with five-star services, empowering the high-quality development of green prefabricated buildings.